Audison Prima APS 8 D 8" Car Subwoofer SUB DUAL 4 OHM 250W RMS

Audison Prima APS 8 D 8" Car Subwoofer SUB DUAL 4 OHM 250W RMS

The APS 8 D is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes from 7.5 lt. to 8.5 lt. It features push connectors for ease of wiring and configurations and has been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the “rocking-mode” phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.

Features

• Ultra-low profile (3.11 in. / 79 mm) for maximum installation flexibility.
  
• Designed to deliver maximum performance in a sealed enclosure starting from 7.5 litres.
  
• Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (almost 9 mm, one-way) while keeping the mounting depth to minimum.
  
• Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure.
  
• Massive motor assembly optimized with FEM (Finite Element Modeling) for perfect control under high power, high excursion conditions.
  
• Water-repellent treated paper 8 in. cone featuring a profile developed with simulation and optimized with the Klippel Scan Vibrometer.
  
• Dual voice coil design specifically developed to be combined with either AP8.9 bit (2 CH +
• 2 CH bridged), AP5.9 bit (Sub CH) or AP4.9 bit/AP4 D (2 CH bridged) amplifiers.
  
• Steel mesh grille and plastic gasket included.
  

Technical Specifications

• Component - SUBWOOFER
  
• Subwoofer size - 200mm (8")
  
• Subwoofer Voice coil - 40mm (1.57")
  
• Power handling - 500W peak, 250W continuous
  
• Impedance - 4+4Ω
  
• Centre to centre distance - 207mm (8.15")
  
• Midrange magnet size D·d·h - 120mm (4.72") x 50mm (1.97") x 28mm (1.1")
  
• Total driver displacement - 0.67 Litres (0.01 cu.inchs)
  
• Hole diameter - 5mm (0.2")
  
• Weight of one speaker - 3.1Kg (6.83 lb)
  
• Magnet - High density flux ferrite
  
• Cone - Water-repellent treated paper